Loading ...
Loading ...
Loading ...
503
7-3. Do-it-yourself maintenance
Owners Manual_USA_A6717BE-A_en
7
Maintenance and care
Blown fuse
Type C
Normal fuse
Blown fuse
■ After a fuse is replaced
● When installing the lid, make sure
that the tab is installed securely.
● If the lights do not turn on even
after the fuse has been replaced,
a bulb may need replacement.
● If the replaced fuse blows again,
have the vehicle inspected SUB-
ARU dealer.
■ If there is an overload in a cir-
cuit
The fuses are designed to blow, pro-
tecting the wiring harness from
damage.
■ When replacing an electronic
component, such as a lights,
etc.
SUBARU recommends that you use
genuine SUBARU products
designed for this vehicle. Because
certain bulbs are connected to cir-
cuits designed to prevent overload,
non-genuine parts or parts not
designed for this vehicle may be
unusable.
WARNING
■ To prevent system break-
downs and vehicle fire
Observe the following precau-
tions.
Failure to do so may cause dam-
age to the vehicle, and possibly a
fire or injury.
● Never use a fuse of a higher
amperage rating than that indi-
cated, or use any other object in
place of a fuse.
● Always use a genuine SUBARU
fuse or equivalent.
Never replace a fuse with a
wire, even as a temporary fix.
● Do not modify the fuses or fuse
boxes.
NOTICE
■ Before replacing fuses
Have the cause of electrical over-
load determined and repaired
SUBARU dealer as soon as pos-
sible.
Loading ...
Loading ...
Loading ...