Loading ...
Loading ...
Loading ...
296
5-4. Using the driving support systems
Owners Manual_USA_A6717BE-A_en
operated
● When the vehicle is stopped by
system control on a steep incline
● When any of the following are
detected while the vehicle is
stopped by system control:
• The driver’s seat belt is unfas-
tened
• The driver’s door is opened
• Approximately 3 minutes have
elapsed since the vehicle was
stopped
The parking brake may be actived
automatically.
The shift position may automatically
change to P. (P.238)
● Situations in which some or all of
the functions of the system cannot
operate: P. 266
■ Dynamic radar cruise control
system warning messages and
buzzers
For safe use: P. 26 0
■ Preceding vehicles that the sen-
sor may not detect correctly
In the following situations, depend-
ing on the conditions, if the system
cannot provide sufficient decelera-
tion or acceleration is necessary,
operate the brake pedal or accelera-
tor pedal.
As the sensor may not be able to
correctly detect these types of vehi-
cles, the approach warning
(P.296) may not operate.
● When a vehicle cuts in front of
your vehicle or changes lanes
away from your vehicle extremely
slowly or quickly
● When changing lanes
● When a preceding vehicle is driv-
ing at a low speed
● When a vehicle is stopped in the
same lane as the vehicle
● When a motorcycle is traveling in
the same lane as the vehicle
■ Conditions under which the
system may not operate cor-
rectly
In the following situations, operate
the brake pedal (or accelerator
pedal, depending on the situation)
as necessary.
As the sensor may not be able to
correctly detect a vehicle, the sys-
tem may not operate properly.
● When a preceding vehicle brakes
suddenly
● When changing lanes at low
speeds, such as in a traffic jam
In situations where the vehicle
approaches a preceding vehicle
and the system cannot provide
sufficient deceleration, such as
if a vehicle cuts in front of the
vehicle, a warning display will
flash and a buzzer will sound to
alert the driver. Depress the
brake pedal to ensure appropri-
ate vehicle-to-vehicle distance.
■ Warnings may not occur
when
In the following situations, the
warning may not operate even
though the vehicle-to-vehicle
distance is short.
When the preceding vehicle is
traveling at the same speed
or faster than your vehicle
When the preceding vehicle is
traveling at an extremely low
speed
Immediately after the vehicle
speed has been set
Approach warning
Loading ...
Loading ...
Loading ...