Loading ...
Loading ...
Loading ...
131
2-2. Charging
Owners Manual_USA_A6717BE-A_en
2
Electric Vehicle system
Refer to the following table and carry out the appropriate correction
procedure.
■ The error warning indicator on the CCID (Charging Circuit
Interrupting Device) flashes
■ Charging indicator of the charging port does not illuminate,
even though charging connector is connected.
When charging cannot be carried out
When charging does not start, even though the normal proce-
dure is followed, check each of the following items. If a mes-
sage is shown on the multi-information display, also refer to
P.138.
When charging cannot be carried out
Likely cause Correction procedure
Electrical leakage detection function
or self-diagnostic function operates
and power is cut off
When the voltage is insufficient, the
error warning indicator may flash
when there is noise interference.
Perform a reset and connect to a
proper power source. (P.88)
If charging does not start, immedi-
ately stop charging and contact your
SUBARU dealer.
Likely cause Correction procedure
Plug is not properly connected to
outlet
Check that the plug is properly con-
nected to the outlet.
Power is out
After power is restored, carry out the
charging procedure again.
Remote switch is off
If the remote switch is equipped, turn
the switch on.
Loading ...
Loading ...
Loading ...