Loading ...
Loading ...
Loading ...
139
2-2. Charging
Owners Manual_USA_A6717BE-A_en
2
Electric Vehicle system
■ If “Charging Stopped Due to Pulled Charging Connector” is
shown
*
: Electricity is consumed when operating battery heater (P.97), the
Remote Air Conditioning System (P.413).
Likely cause Correction procedure
AC charging connector is removed
while AC charging
When the AC charging connector is
removed while AC charging,
charging stops. If you want to fully
charge the traction battery, recon-
nect the AC charging connector.
After the traction battery is fully
charged, the AC charging connector
is removed while the traction battery
is being recharged again because
electricity-consuming functions
*
have
been used and the remaining charge
is now reduced.
AC charging connector is not
securely connected
Check the connection status of the
AC charging connector.
• When connecting the AC charging
connector, make sure not to touch
the latch release button. Insert the
AC charging connector securely
until you hear a click. The AC
charging connector may not be
connected correctly if the latch
release button is pressed while
inserting.
• After connecting the AC charging
connector, check that the latch
release button is not pressed and
the charging indicator of the
charging port is turned on.
If charging cannot be carried out,
even though the proper procedures
were followed, have the vehicle
inspected by your SUBARU dealer.
Latch release button of AC charging
connector was pressed while AC
charging
When the latch release button is
pressed while AC charging, charging
stops. To continue charging, recon-
nect the AC charging connector.
Loading ...
Loading ...
Loading ...