Loading ...
Loading ...
Loading ...
106
2-2. Charging
Owners Manual_USA_A6717BE-A_en
the charging schedule and start
charging, perform any of the follow-
ing procedures.
● Turn “Charge Now” on (P.122,
126)
● While the charging indicator is
flashing, remove and reconnect
the charging connector immedi-
ately
■ When the charging connector
cannot be inserted into the AC
charging inlet
P.91
■ Safety function
If the latch release button is
pressed, charging will not begin
even if the AC charging cable is
connected.
Also, charging will be stopped if the
latch release button is pressed and
held for several seconds during
charging. When restarting charging,
reinsert the charging connector after
pulling it out, and check that the
charging indicator of the charging
port illuminates.
■ Charging time may increase
P.102
■ When your circuit breaker trips
during charging
The upper limit of the charging cur-
rent can be changed on the multi-
information display or multimedia.
● Setting operations on multi-infor-
mation display
1 Press or of the meter
control switches to select .
2 Press or of the meter
control switches to select “Vehi-
cle Settings”, and then press and
hold .
3 Press or of the meter
control switches to select
“Charging Settings”, and then
press .
The “Charging Settings” screen will
be displayed.
4 Press or of the meter
control switches to select
“Charging Current”, and then
press .
The “Charging Current” screen will
be displayed.
5 Press or of the meter
control switches to select “16A”
or “8A” and then press .
● Setting operations on multimedia
1 Select .
2 Select “Vehicle customize”.
3 Select “Charging”.
4 Select “Charging current”.
5 Select “16A” or “8A”.
The maximum charging current is
limited to less than or equal to the
selected current.
*
If the breaker still trips while
charging, even after changing the
upper limit of the charging current,
check if the connected power
source meets the specified charging
conditions. (P. 9 4 )
*
: Restricting the charging current
will lengthen the charging time.
■ Changing the “Charging Limit”
settings
The upper limit of the charge capac-
ity can be changed on the multi-
information display or multimedia.
The selected upper limit value is
common to AC charging and DC
charging.
● Setting operations on multi-infor-
mation display
Loading ...
Loading ...
Loading ...