Loading ...
Loading ...
Loading ...
EC-950
[YD (WITH EURO-OBD)]
DTC P0045 TC BOOST CONTROL SOLENOID VALVE
On Board Diagnosis Logic EBS011TP
DTC Confirmation Procedure EBS011TQ
NOTE:
If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at
least 10 seconds before conducting the next test.
WITH CONSULT-II
1. Turn ignition switch ON.
2. Select “DATA MONITOR” mode with CONSULT-II.
3. Start engine and let it idle for at least 5 seconds.
4. If 1st trip DTC is detected, go to EC-952, "
Diagnostic Procedure"
.
WITH GST
Follow the procedure “WITH CONSULT-II” above.
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P0045
Turbocharger boost control sole-
noid valve circuit / open
An improper voltage is sent to ECM
through turbocharger boost control
solenoid valve.
● Harness or connectors
(The solenoid valve circuit is
open or shorted.)
● Turbocharger boost control
solenoid valve
SEF817Y
Loading ...
Loading ...
Loading ...