Loading ...
Loading ...
Loading ...
EC-932
[YD (WITH EURO-OBD)]
TROUBLE DIAGNOSIS
INSPECTION PROCEDURE
1. Turn ignition switch OFF.
2. Connect “GST” to data link connector, which is located under
drivers side dash panel near the fuse box cover.
3. Turn ignition switch ON.
4. Enter the program according to instruction on the screen or in
the operation manual.
(*: Regarding GST screens in this section, sample screens are
shown.)
5. Perform each diagnostic mode according to each service proce-
dure.
For further information, see the GST Operation Manual of the
tool maker.
MODE 4 CLEAR DIAG INFO
This mode can clear all emission-related diagnostic information. This includes:
● Clear number of diagnostic trouble codes (MODE 1)
● Clear diagnostic trouble codes (MODE 3)
● Clear trouble code for freeze frame data (MODE 1)
● Clear freeze frame data (MODE 2)
● Reset status of system monitoring test (MODE 1)
● Clear on board monitoring test results (MODE 7)
MODE 6 (ON BOARD TESTS) This mode is not applicable on this vehicle.
MODE 7 (ON BOARD TESTS)
This mode enables the off board test drive to obtain test results for emission-related pow-
ertrain components/systems that are continuously monitored during normal driving condi-
tions.
MODE 9 (CALIBRATION ID)
This mode enables the off-board test device to request specific vehicle information such
as Vehicle Identification Number (VIN) and Calibration IDs.
Diagnostic test mode Function
PBIB0376E
SEF398S
SEF416S
Loading ...
Loading ...
Loading ...