Loading ...
Loading ...
Loading ...
EC-1352
[YD (WITHOUT EURO-OBD)]
DTC P0335 CKP SENSOR
On Board Diagnosis Logic EBS01216
DTC Confirmation Procedure EBS01217
NOTE:
If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at
least 10 seconds before conducting the next test.
WITH CONSULT-II
1. Turn ignition switch ON.
2. Select “DATA MONITOR” mode with CONSULT-II.
3. Start engine and let it idle for at least 5 seconds.
If engine could not start, keep ignition switch at START position
for 5 seconds.
4. If 1st trip DTC is detected, go to EC-1354, "
Diagnostic Proce-
dure" .
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P0335
Crankshaft position sen-
sor circuit
Crankshaft position sensor signal is not detect
by the ECM when engine is running.
● Harness or connectors
(The sensor circuit is open or
shorted.)
● Crankshaft position sensor
SEF817Y
Loading ...
Loading ...
Loading ...