Loading ...
Loading ...
Loading ...
EC-1088
[YD (WITH EURO-OBD)]
DTC P0563 BATTERY VOLTAGE
3. CHECK JUMPER CABLES INSTALLATION
Check that the jumper cables are connected in the correct sequence.
OK or NG
OK >> GO TO 4.
NG >> Reconnect jumper cables properly.
4. CHECK BATTERY FOR BOOSTER
Check that the battery for the booster is a 12V battery.
OK or NG
OK >> GO TO 5.
NG >> Change the vehicle for booster.
5. PERFORM DTC CONFIRMATION PROCEDURE AGAIN
Perform EC-1087, "
DTC Confirmation Procedure" , again.
OK or NG
OK >> GO TO 7.
NG >> GO TO 6.
6. REPLACE ECM
1. Replace ECM.
2. Perform initialization of NATS system and registration of all NATS ignition key IDs. Refer to EC-896,
"NATS (Nissan Anti-theft System)" .
3. Perform Fuel Pump Learning Value Clearing. Refer to EC-890, "
Fuel Pump Learning Value Clearing" .
>> INSPECTION END
7. CHECK ELECTRICAL PARTS DAMAGE
Check the following for damage.
● Wiring harness and harness connectors for burn
● Fuses for short
OK or NG
OK >> INSPECTION END
NG >> Repair or replace malfunctioning part.
SEF439Z
Loading ...
Loading ...
Loading ...