Loading ...
Loading ...
Loading ...
EC-1380
[YD (WITHOUT EURO-OBD)]
DTC P0606 ECM
DTC P0606 ECM PFP:23710
Description EBS01228
The ECM consists of a microcomputer and connectors for signal
input and output and for power supply. The ECM controls the engine.
On Board Diagnosis Logic EBS01229
DTC Confirmation Procedure EBS0122A
NOTE:
If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at
least 10 seconds before conducting the next test.
WITH CONSULT-II
1. Turn ignition switch ON.
2. Select “DATA MONITOR” mode with CONSULT-II.
3. Wait at least 5 seconds.
4. If DTC is detected, go to EC-1380, "
Diagnostic Procedure" .
Diagnostic Procedure EBS0122B
1. INSPECTION START
With CONSULT-II
1. Turn ignition switch ON.
2. Select “SELF DIAG RESULTS” mode with CONSULT-II.
3. Touch “ERASE”.
4. Perform EC-1380, "
DTC Confirmation Procedure" , again.
5. Is 1st trip DTC P0606 displayed again?
Yes or No
Yes >> GO TO 2.
No >> INSPECTION END
MBIB0625E
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P0606
Engine control module
(Processor)
ECM calculation function is malfunctioning.
● ECM
SEF817Y
Loading ...
Loading ...
Loading ...