Loading ...
Loading ...
Loading ...
EC-1402
[YD (WITHOUT EURO-OBD)]
DTC P1211 TCS CONTROL UNIT
DTC P1211 TCS CONTROL UNIT PFP:47850
Description EBS01239
The malfunction information related to TCS is transferred through the CAN communication line from ESP/
TCS/ABS control unit to ECM.
Be sure to erase the malfunction information such as DTC not only for ESP/TCS/ABS control unit but
also for ECM after TCS related repair.
On Board Diagnosis Logic EBS0123A
The MI will not light up for this self-diagnosis.
DTC Confirmation Procedure EBS0123B
NOTE:
If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at
least 10 seconds before conducting the next test.
WITH CONSULT-II
1. Turn ignition switch ON.
2. Select “DATA MONITOR” mode with CONSULT-II.
3. Wait at least 5 seconds.
4. If DTC is detected, go to EC-1402, "
Diagnostic Procedure" .
Diagnostic Procedure EBS0123C
Go to BRC-58, "TROUBLE DIAGNOSIS" (models with ESP system) or BRC-11, "TROUBLE DIAGNOSIS"
(model without ESP system).
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P1211 TCS control unit
ECM receives a malfunction information from
ESP/TCS/ABS control unit.
● ESP/TCS/ABS control unit
● TCS related parts
SEF817Y
Loading ...
Loading ...
Loading ...