Loading ...
Loading ...
Loading ...
DTC P0336 CKP SENSOR
EC-1051
[YD (WITH EURO-OBD)]
C
D
E
F
G
H
I
J
K
L
M
A
EC
On Board Diagnosis Logic EBS011B6
DTC Confirmation Procedure EBS011B7
NOTE:
If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at
least 10 seconds before conducting the next test.
WITH CONSULT-II
1. Turn ignition switch ON.
2. Select “DATA MONITOR” mode with CONSULT-II.
3. Start engine and let it idle for at least 5 seconds.
If engine could not start, keep ignition switch at START position
for 5 seconds.
4. If 1st trip DTC is detected, go to EC-1053, "
Diagnostic Proce-
dure" .
WITH GST
Follow the procedure “WITH CONSULT-II” above.
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P0336
Crankshaft position sen-
sor circuit range/perfor-
mance
Crankshaft position sensor signal is not in the
normal pattern when engine is running.
● Harness or connectors
(The sensor circuit is open or
shorted.)
● Crankshaft position sensor
● Signal plate
SEF817Y
Loading ...
Loading ...
Loading ...