Loading ...
Loading ...
Loading ...
DTC P0201 - P0204 FUEL INJECTOR
EC-1319
[YD (WITHOUT EURO-OBD)]
C
D
E
F
G
H
I
J
K
L
M
A
EC
4. CHECK FUEL INJECTOR-II
1. Remove two fuel injectors of malfunctioning cylinder and another cylinder.
2. Install fuel injectors to different cylinder.
3. Reconnect ECM harness connector and fuel injector harness connector.
4. Turn ignition switch ON.
5. Select “SELF DIAG RESULTS” mode with CONSULT-II.
6. Touch “ERASE”.
7. Perform DTC Confirmation Procedure, EC-1316, "
DTC Confirmation Procedure" .
8. Is another DTC displayed?
Yes or No
>> Select “SELF DIAG RESULTS” mode with CONSULT-II.
5. CHECK INTERMITTENT INCIDENT
Refer to EC-1260, "
TROUBLE DIAGNOSIS FOR INTERMITTENT INCIDENT" .
>> INSPECTION END
Component Inspection EBS01203
FUEL INJECTOR
1. Disconnect fuel injector.
2. Check continuity between terminals as shown in the figure.
3. If NG, replace fuel injector.
Removal and Installation EBS01204
FUEL INJECTOR
Refer to EM-157, "INJECTION TUBE AND FUEL INJECTOR" .
Continuity should exist.
PBIB0406E
Loading ...
Loading ...
Loading ...