Loading ...
Loading ...
Loading ...
EC-1364
[YD (WITHOUT EURO-OBD)]
DTC P0340 CMP SENSOR
DTC Confirmation Procedure EBS0121O
NOTE:
If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at
least 10 seconds before conducting the next test.
WITH CONSULT-II
1. Turn ignition switch ON.
2. Select “DATA MONITOR” mode with CONSULT-II.
3. Start engine and let it idle for at least 5 seconds.
If engine could not start, keep ignition switch at START position
for 5 seconds.
4. If 1st trip DTC is detected, go to EC-1366, "
Diagnostic Proce-
dure" .
SEF817Y
Loading ...
Loading ...
Loading ...