Loading ...
Loading ...
Loading ...
EC-1350
[YD (WITHOUT EURO-OBD)]
DTC P0237, P0238 TC BOOST SENSOR
6. CHECK INTERMITTENT INCIDENT
Refer to EC-1260, "
TROUBLE DIAGNOSIS FOR INTERMITTENT INCIDENT" .
>> INSPECTION END
Component Inspection EBS01211
CHECK TURBOCHARGER BOOST SENSOR
1. Remove turbocharger boost sensor with its harness connected.
2. Turn ignition switch ON.
3. Use pump to apply pressure sensor as shown in the figure.
CAUTION:
● Always calibrate the pressure pump gauge when using it.
● Inspection should be done at room temperature [10-30°C (50-86°F)].
4. Check the output voltage between turbocharger boost sensor terminal 2 and body ground.
Removal and Installation EBS01212
TURBOCHARGER BOOST SENSOR
Refer to EM-135, "CHARGE AIR COOLER" .
Pressure (Relative to atmospheric pressure) Voltage V
0 kPa (0 mbar, 0 mmHg, 0 inHg) Approximately 2.3V
+40 kPa (400 mbar, 300mmHg, 11.81 inHg) Approximately 2.9V
MBIB0925E
Loading ...
Loading ...
Loading ...