Loading ...
Loading ...
Loading ...
EC-726
[QR (WITHOUT EURO-OBD)]
DTC P1706 PNP SWITCH
WITHOUT CONSULT-II
1. Turn ignition switch ON.
2. Check voltage between ECM terminal 102 (PNP switch signal)
and body ground under the following conditions.
3. If NG, go to EC-728, "Diagnostic Procedure" .
Condition (Gear position) Voltage V (Known good data)
P or N position (A/T)
Neutral position (M/T)
Approx. 0
Except above position
A/T: Battery voltage
M/T: Approximately 5V
MBIB0029E
Loading ...
Loading ...
Loading ...