Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR CAR
38
11)
The automatic motion can be interrupted
in any position by pressing button
(1)again.
If the electric blind is closed, the roof
opening control opens it too.
40 04186S0001EM
CLOSING
From the position of complete opening
press button (1) next to the symbol:
the roof will close completely.
A long press of the same button moves
the roof until it is released.
The automatic motion can be interrupted
in any position by pressing button
(1)again.
SWIVEL OPENING
To bring the roof into "swivel" position,
press and release button (2) fig. 40.
This type of swivel opening can be
activated irrespective of the position of
the sun roof. When starting with the roof
in closed position, pressing the button
automatically causes its swivel-opening.
If the roof is already open, pressing the
button will open it to the swivel position.
Press button (2) again during automatic
opening or closing to stop movement of
the sunroof.
SUN BLIND MOVEMENT
The front sun blind is electrically
operated.
Press the (3) fig. 40 symbol next to
symbol : to open the sun blind.
Press the (3) symbol next to symbol :
to close the sun blind.
The automatic motion can be interrupted
in any position by pressing button
(3)again.
If the roof is open, the sun blind closing
control will also close the roof.
ANTI-PINCH DEVICE
The sunroof has an anti-pinch safety
system capable of detecting the
presence of an obstacle during the
closing movement: if this happens, the
system intervenes and the movement of
the roof is immediately reversed into
opening.
INITIALISATION PROCEDURE
Automatic operation of the sunroof
must be initialised again in case of faulty
sunroof operation.
WARNING The anti-pinch safety function
is deactivated during the initialisation
procedure.
Proceed as follows:
Set the ignition device to AVV and
start the engine;
press button (1) next to the symbol
to bring the roof into completely closed
position;
open the driver side door
bring the ignition device to STOP;
within 5 seconds, set the ignition
device to AVV and start the engine;
within 10 seconds hold button (1) next
to the symbol pressed; after 10
seconds you will hear the electric motors
of the roof and blind stop in sequence;
release the button and within 5
seconds, press button (1) next to the
symbol and hold it down (until the
cycle end): the roof will automatically
perform a complete open and close cycle
including both the window and the blind
(to indicate that the initialisation has
been successful). If this does not occur,
the procedure must be restarted from
the beginning;
check that the re-initialisation
operation was successful by checking
the “one touch” function of the window
and of the blind.
Loading ...
Loading ...
Loading ...