Loading ...
Loading ...
Loading ...
21
button where you want to memorise the
position for 1.5 seconds.
When a new seat position is memorised,
the previously memorised position
on the same button is automatically
overwritten.
Recalling a memorised position is also
possible for about 3 minutes after the
doors are opened and about 1 minute
after the engine is stopped. To recall a
memorised position, press the relevant
button briefly.
EASY ENTRY FUNCTION
The Easy Entry function is designed to
retract the driver side seat automatically
by 2.36 in (60 mm) to make it easier for
the driver to get in and out of the car.
The movement is activated only if the
seat is set to a driving position which is in
front of the B pillar of the car.
The function is associated with
electrically adjustable front seats for
each of the three stored positions.
The Easy Entry function can be
activated/deactivated using the Connect
system.
Activating entrance mode
With the door open and the starter
device at STOP, the driver side seat will
be in a position retracted by 2.36 in
(60 mm) with respect to the driving
position set by the user.
When the door is closed and the starter
device is in the ON position, the seat will
automatically return to the set driving
position.
NOTE If the seat is moved manually
while it is still in retracted position, it will
remain in the new set position when the
car is entered again.
Activating exit mode
In order to help the driver get out of the
car, the driver side seat will move back by
2.36 in (60 mm) when the ignition device
is in STOP mode and the driver side door
is opened.
NOTE Pressing any button on the
seat memory or control panel will
immediately interrupt the automatic
positioning function (antipanic function).
The operation must be repeated to
complete the function.
FRONT AND REAR SEAT ELECTRIC
HEATING
(where provided)
Front seats
With ignition device at ON, press the
buttons fig. 18 on the dashboard.
18 04066V0110EM
You can select three heating levels:
“maximum heating”: three LEDs lit on
the buttons;
“medium heating”: two LEDs lit on the
buttons;
“minimum heating”: one LED lit on the
buttons.
Rear seats
With the ignition device in the ON
position, press the buttons fig. 19
located in the rear part of the central
tunnel to activate the rear seat heating.
19 04046V0002EM
Loading ...
Loading ...
Loading ...