Alfa-romeo 2020 Stelvio Car

User Manual - Page 135

For 2020 STELVIO.

PDF File Manual, 292 pages, Read Online | Download pdf file

2020 STELVIO photo
Loading ...
Loading ...
Loading ...
133
116 06016V0004EM
117 07146V0050EM
Important notes
If the sensor does not detect any vehicle
ahead, the device will maintain a fixed
set speed.
If the sensor detects a vehicle ahead,
the device automatically intervenes by
braking (or accelerating) slightly in order
not to exceed the original set speed, so
that the car keeps the preset distance,
seeking to adapt to the speed of the
vehicle ahead.
In the cases described below, the system
performance is not guaranteed, it is
therefore advisable to turn the device on
by pressing the / CANCfig. 117 button:
driving in fog, heavy rain, snow, heavy
traffic and in complex driving situations
(e.g. on motorways with roadworks in
progress);
driving near a bend (winding roads),
icy, snowy, slippery roads or with steep
slopes and descents;
entering a turn lane or on a slip road;
towing a trailer;
when circumstances do not allow safe
driving at a constant speed.
ACTIVATION / DEACTIVATION
The device may have four operating
states:
Enabled (speed not programmed);
Activated (speed programmed);
Pausing;
Deactivated.
Enabling / Activation
To turn on the device, press and release
the / CANCfig. 117 button.
With the device enabled and ready for
operation, the display on the instrument
panel shows the white icon with dashes
fig. 116 in place of the speed.
116 05036S0182EM
Setting a speed activates the system.
The instrument panel displays shows the
green icon fig.118 withthe set speed.
The device cannot be enabled when
RACE mode is active.
Pausing / Deactivating
With the device enabled (speed not set),
press the / CANC button.
Press the / CANC button again to
deactivate the device completely.
SETTING THE DESIRED SPEED
Speeds from 30 km/h (or 19 mph if
the unit set by the driver is "mph") to
180 km/h (or 110 mph if the unit set by the
driver is "mph") can be set.
when the car reaches the desired speed,
raise/lowerthe RES/SET leverfig.119
and release it to activate the device.
When the accelerator is released, the
car will maintain the selected speed
automatically.
Loading ...
Loading ...
Loading ...