Loading ...
Loading ...
Loading ...
IN AN EMERGENCY
188
bolt threads before fitting: they could come
unscrewed.
IMPORTANT
70) When turning the jack handle make sure
that it can turn freely without scraping
your hand against the ground. The moving
components of the jack ("worm screw"
and joints) can also cause injuries: avoid
touching them. If you come into contact
with lubricating grease, clean yourself
thoroughly.
71) Contact an Alfa Romeo Dealership
as soon as possible to have the correct
tightening of the wheel bolts checked.
TYRE REPAIR KIT
DESCRIPTION
179) 180) 181) 182) 183) 184) 185) 186) 187) 188)
72)
3)
The Tyre Repair Kit is located in the
luggage compartment, inside a dedicated
container marked with the Alfa Romeo
logo.
To access the Tyre Repair Kit, open the
boot, lift the load platform.
The Tyre Repair Kit includes also:
aspraycan(1)fig. 204 ofsealant,with
filling : tube (2);
a compressor (4) complete with
pressure gauge, fittings and an adhesive
label (3) with the words Max. 80 km/h”, to
be attached in a position easily visible to
the driver (eg. on the dashboard) after
repairing the tyre;
some adaptors, for inflating different
elements.
204 08066V0002EM
WARNING The sealing liquid is effective
for outside temperatures between -40°F
and 122°F (-40°C and +50°C). The sealant
has an expiry date.
INFLATION PROCEDURE
179) 180) 181) 182) 183) 184) 185) 189) 187) 188)
Proceed as follows:
stop the car in a position that is not
dangerous for oncoming traffic where
you can repair the tyre safely, as far as
possible from the side of the road;
turn on the hazard warning lights;
engage the electric parking brake;
engage P (Park) mode;
stop the engine and put on the
reflective safety jacket (for your
own safety and to comply with the
regulations in force in the country where
you are) before getting out of the car.
when the situation requires it (for
your own safety and to comply with the
regulations in force in the country where
you are), take the warning triangle from
the luggage compartment and position it
at a suitable distance from the car.
put on the gloves, connect the tube
(5) fig.205 tothespraycan(1) usingthe
connector (6). Unscrew the tyre valve cap
and screw the filler pipe ring nut (2) onto
the tyre valve;
205 08066V0004EM
makesure thatswitch(7) fig.206 of
the compressor (4) is in (0) (off) position;
Loading ...
Loading ...
Loading ...