Loading ...
Loading ...
Loading ...
167
177 07216V0101EM
Thereis a LEDonthebutton1 fig.177,
which may be in one of the following
states:
LED off: indicates that at least one of
the above conditions is not met, or the
trailer light wiring is connected to the
socket;
Flashing LED (slow flashing):
indicates that the tow hitch is in motion;
LED flashing (rapid flashing):
indicates a failure of the tow hitch or that
the system must be initialized (see the
description in the following paragraph);
LED on fixed: indicates that the tow
hook can be moved.
System initialisation
If the tow hook is not correctly initialized,
the LED onbutton1fig.177 flashes
quickly.
In this case it is sufficient to move
the hook pressing the button: the
initialization will be performed
automatically.
During the initialization procedure the
tow hook will fully retract (if it was not
previously retracted), then it will come
out of its seat and will end its stroke in
the "fully extracted" position.
WARNING
158) The ABS with which the car is equipped
will not control the braking system of the
trailer. Particular caution is therefore
required on slippery roads.
159) Never modify the braking system of
the car to control the trailer brake. The
towing braking system must be completely
independent of the vehicle's hydraulic
system.
160) To avoid damage to your hands, keep
them away from the knob while inserting the
tow hook into position on the car bracket.
Loading ...
Loading ...
Loading ...