Loading ...
Loading ...
Loading ...
165
Position the tow hook so that the delta
inserts on the tow hook fixing bracket
are aligned with the crack between the
lower edge and the mounting pipe on the
carfig.169;
push the tow hook upwards and
the pretensioned mechanism will
automatically fasten itself in position.
160)
169 07216V0004EM
Use the supplied key to close the
mechanism:
insert the key into the lock on the knob,
turn it fully anticlockwise and remove it;
fasten the protection cap onto the
lock.
WARNING The key can only be removed
when the locking mechanism is closed
( ).
WARNING To prevent losing the key
while towing, DO NOT leave it in the lock.
Remove the ball protection cover from
the tow hook and attach the trailer.
Connecting the electrical system
To connect the trailer’s electrical system,
proceed as described below:
turn the connector mounting bracket
downwards. The bracket is to the left of
thetow hook mountingpipefig.170;
170 07216V0007EM
once you have lowered the protection
cover, insert the trailer’s plug into the
socket on the car. To make sure that the
two connectors fit together perfectly,
check that the tab on the plug is aligned
withthe notch onthe socketfig. 171;
insert the plug fully into the socket and
enable the safety lock, if provided.
171 07216V0008EM
Removing the tow hook
When the tow hook is no longer needed,
disconnect the electrical connections
and remove it from its position as
described below:
remove the protection cap and insert
the keyintothelockfig.172;
open the lock by turning the key fully
clockwise;
172 07216V0009EM
grab the tow hook and move the knob
away from the fixing bracket by pulling it
Loading ...
Loading ...
Loading ...