Loading ...
Loading ...
Loading ...
STARTING AND DRIVING
158
REFUELLING THE CAR
154) 155) 156)
Always stop the engine before refuelling.
PETROL ENGINES
Only use unleaded petrol with a number
of octanes (R.O.N.) not lower than 91
(EN228 specification).
DIESEL ENGINES
Only use Diesel for motor vehicles
(EN590 specification).
REFUELLING PROCEDURE
The fuel flap is unlocked when the central
door locking system is released, while it
is automatically locked when the central
locking system is applied.
Opening the flap
To refuel proceed as follows:
openflap(1)fig. 155, pressingonthe
point shown bythe arrow fig.156;
remove the closing cap (2);
return the cap to its seat (4);
introduce the dispenser in the filler
and refuel;
after refuelling, before removing the
dispenser, wait for at least 10 seconds in
order for the fuel to flow inside the tank;
then remove the dispenser from the
filler, close the cap and then close the
flap.
The refuelling procedure described
above is illustrated on the label (where
provided) located inside the fuel flap.
155 07226V0042EM
156 07206V0001EM
TOPPING UP AdBlue
®
DIESEL
EMISSIONS ADDITIVE
(2.2 JTD versions only)
157)
Preliminary conditions
AdBlue
®
freezes at temperatures lower
than 12.2 °F (-11 °C). If the car stands for
a long time at this temperature refilling
could be difficult. For this reason, it is
advised to park the car in a garage and/or
heated environment and wait for the
AdBlue
®
to return to liquid state before
topping up.
Proceed as follows:
park the car on level ground;
switch off the engine by turning the
ignition device to STOP;
openthefuelflap (1) fig.155 andthen
unscrew and remove the cap (3) (blue)
from the AdBlue
®
filler and put it in the
stowing position provided (4).
Refilling with nozzles
You can fill up at any AdBlue
®
distributor.
Proceed as follows:
insert the AdBlue
®
nozzle in the filler,
start refilling and stop refilling at the
first shut-off (the shut-off indicates that
the AdBlue
®
tank is full). Do not proceed
with the refilling, to prevent spillage of
AdBlue
®
;
extract the nozzle.
Refilling with containers
Proceed as follows:
check the expiration date;
read the advice for use on the label
before pouring the content of the bottle
into the AdBlue
®
tank;
Loading ...
Loading ...
Loading ...