Loading ...
Loading ...
Loading ...
31
WINDSCREEN WIPER
WINDSCREEN WIPER/ WASHER
7) 8)
This operates only with the ignition
device at ON.
The ring fig. 36 can be set to the
following positions:
windscreen wiper off.
rotating the ring nut to the
first position activates the
first sensitivity level of the
rain sensor.
rotating the ring nut to the
second position activates the
second sensitivity level of the
rain sensor.
rotating the ring nut to the
third position activates the
first continuous speed level
of the windscreen wipers in
manual mode.
rotating the ring nut to the
fourth position activates the
second continuous speed
level of the windscreen
wipers in manual mode.
36 04146V0001EM
Move the stalk upwards (it only has
unstable positions) to activate the
MIST function. It only operates while
the stalk is held in this position. When
released, the stalk will return to its
default position and the windscreen
wiper automatically stop. This function is
useful to remove small deposits of dust
from the windscreen, or morning dew.
WARNING This function does not
activate the windscreen washer;
windscreen washer fluid will not
therefore be sprayed onto the
windscreen. To spray windscreen washer
fluid onto the windscreen, the washing
function must be used.
With ring in position or , the
windscreen wiper will automatically
adapt its operating speed to the speed of
the car.
WARNING Windscreen washer
operation is disabled when the outside
temperature is below 3°C: no jet will
come out of the windscreen washer
nozzles and the windscreen wiper blades
will not move.
“Smart washing” function
Pull the stalk towards the steering wheel
(unstable position) to activate a washing
cycle.
Hold the stalk pulled to activate
both the windscreen washer jet and
the windscreen wiper with a single
movement, until the stalk is released.
REAR WINDOW WIPER/WASHER
Engaging reverse gear with the
windscreen wiper operating activates a
single cycle of the rear window wiper.
Moving the stalk fig. 36 (it only has
unstable positions):
towards the instrument panel
activates the rear window washer
(a brief push activates one washing
cycle, keeping the stalk pushed washes
continuously until the stalk is released);
downwards (with reverse gear
engaged) this activates/deactivates the
continuous operation of the rear window
wiper, regardless of the movement of the
windscreen wiper;
downwards (with reverse gear not
engaged) this activates/deactivates
intermittent operation (with actuating
frequency of about 3 seconds) of the
rear window wiper, regardless of the
movement of the windscreen wiper.
Loading ...
Loading ...
Loading ...