Loading ...
Loading ...
Loading ...
29
The AHB system is used to switch
the high beam headlights on and off
automatically and to adapt the lighting
near towns.
Function enabling
This function is enabled using the "Driver
Assistance" Menu and then selecting
"Comfort" in the Connect system with
the light switch turned to position .
Function activation
The first time the main beam headlights
are activated (pushing the left lever),
the function is activated (green warning
light or the symbol comes on in the
instrument panel).
If the main beam headlights are actually
on, the warning light/icon will also
come on in the instrument panel.
The function activates the high beam
headlights when the speed is higher than
25 mph (40 km/h).
When the speed is lower than 15 mph
(25 km/h) and the function is active,
the function switches the main beam
headlights off.
If the fixed main beam headlights are
operated quickly again (pushing the left
stalk towards the instrument panel), the
warning light/icon will switch on in
the instrument panel and the main beam
headlights will be switched on fixed until
the speed exceeds 25 mph (40 km/h).
When the speed of 25 mph (40 km/h)
is exceeded again, the automatic
functioning is reactivated.
Function deactivation
To deactivate the automatic function
rotate the light switch ring to position .
IMPORTANT NOTES
The correct operation of the automatic
high beam function may be influenced by:
presence of reflections on road sign
surfaces;
dim light of other road users (e.g.
cyclists or pedestrians);
bad weather (rain or fog);
presence of dirt on the sensor or
obstruction of the sensor;
damage to the windscreen or presence
of dirt or ice/snow or misting up of the
windscreen;
presence of vehicles approaching in
the opposite direction partially obscured
by a central obstacle.
WARNING Make sure that the
windscreen is always defrosted and
demisted in winter.
DIRECTION INDICATORS
Move the left stalk fig. 32 to the end of
its travel (unstable position):
up: right direction signal activated,
the warning light flashes on the
instrument panel;
down: left direction signal activated,
the warning light flashes on the
instrument panel.
The direction indicators are switched off
automatically when the steering wheel is
straightened.
"Lane Change" function
When you want to signal the change of
the driving lane, move the lever until the
first impulse (about half stroke).
The direction indicator on the side
selected will be activated for 3 flashes
and then go out automatically.
HEADLIGHT ALIGNMENT ADJUSTMENT
Headlight alignment corrector
(where provided)
This device is not available on cars
equipped with Xenon headlights
(Bi-Xenon Headlamps 35W version), as
they require an automatic alignment
correction system.
It only operates with the ignition device
at ON.
Automatic high beam (AHB system)
headlights
(where provided)
Loading ...
Loading ...
Loading ...