Alfa-romeo 2020 Stelvio Car

User Manual - Page 101

For 2020 STELVIO.

PDF File Manual, 292 pages, Read Online | Download pdf file

2020 STELVIO photo
Loading ...
Loading ...
Loading ...
99
86 06066S0001EM
As soon as the threshold of 5 mph
(8 km/h) is exceeded for a few
seconds (variable according to the car
conditions) with driver or passenger
side (with passenger seated) seat belts
unfastened, an acoustic warning is
activated together with the flashing of
the warning light for approximately
105 seconds.
When this cycle of warnings is activated
it will stay on for its entire length
(regardless of the car speed) or until the
seat belts are fastened again.
When the reverse is engaged, during the
cycle of warnings, the acoustic signal
is deactivated and the warning light
turns on fixed. The cycle of warnings
will be reactivated as soon as the speed
exceeds 5 mph (8 km/h) again.
REAR SEAT BELT ICON BEHAVIOUR
(where provided)
The icons are shownonthedisplayfig. 87
after a few seconds have elapsed since
the ignition device is turned to ON and
disappear after approximately 30
seconds.
After a door closes, or following a change
in belt fastening status, the icons are
shown again for approximately 30
seconds before disappearing.
The icons shown on the display indicate:
(1) - rear left seat belt;
(2) - rear central seat belt (where
provided);
(3) - rear right seat belt.
87 06066S0002EM
The icons are displayed according to
the corresponding seat belts in the rear
seats, and stay on for about 30 seconds
from the last seat belt status change:
if the seat belt is fastened the
corresponding icon will be green;
if the seat belt is unfastened the
corresponding icon will be red.
If a rear seat belt is unfastened, an
acoustic warning (3 "beeps") will be
activated along with the relevant icon
lighting up in the display.
Furthermore the icons will light up again
for 30 seconds each time one of the rear
doors is closed.
The visual indication (flashing red) will
start and stop independently for each
warning light if several seat belts are
unfastened.
The icon will turn green after the
corresponding seat belt has been
fastened.
The rear seat icons will go out, regardless
of the state of the belt (red icon or green
icon), approximately 30 seconds after
the last signal.
IMPORTANT NOTES
As far as the rear seats are concerned,
the SBA system will only indicate
whether the seat belts are unfastened
(red icon) or fastened (green icon), not
the presence of any passengers.
The warning lights/icons all stay off if all
seat belts (front and rear) are fastened
when the ignition device is set to ON.
For the rear seats, the icons will activate
a few seconds after the ignition device
has been turned to ON, regardless of the
Loading ...
Loading ...
Loading ...