Loading ...
Loading ...
Loading ...
STARTING AND DRIVING
154
147 07226S0001EM
Activation conditions
Once switched on, the system becomes
active only if the following conditions are
met:
the car speed is equal to or higher
than 40 mph (60 km/h) (the system
is deactivated at speeds higher than
110 mph/ 180 km/h);
the lane limit lines are visible at least
on one side;
there are suitable visibility conditions;
the road is straight or with wide radius
bends;
a suitable distance is kept from the
vehicle in front;
the direction indicator (for leaving the
lane) is not active.
SYMBOLS AND MESSAGES ON THE
DISPLAY
The Lane Keeping Assist system also
advises the driver when the car changes
lane by showing symbols and messages
on the instrument panel display.
The message at the top of the
instrument panel display remains active
only until the main reconfigurable area
of the display is activated (see the
description in the "Display" paragraph
in the "Knowing the instrument panel"
section) pressing the TRIP button
located on the right lever of the steering
wheel.
Activating the main reconfigurable
area the messages related to the Lane
Keeping Assist system will be shown in
this area.
When the system is active and the
lane limits have not been detected,
the display shows a specific grey icon,
fig. 148.
Exiting a lane with detection of a single
limit
When the system is active and only, for
example, the left lane limit has been
detected, the detected lane lights up
in white on the display; the system is
ready to provide visual warnings on the
display in the event of unintentional
exiting of the lane (direction indicator
notactivated)totheleft, fig.149.
When the system detects that the car
has approached the lane line and is about
to pass it, the left line on the display
lightsupinyellow andredfig.150.
148 07226S0020EM
149 07226S0023EM
150 07226S0024EM
Loading ...
Loading ...
Loading ...