Loading ...
Loading ...
Loading ...
SAFETY
98
83 06056V0005EM
84 06056S0003EM
76)
ADJUSTING THE SEAT BELT HEIGHT
Four different adjustments in height are
possible.
To adjust the window height, from the
top downwards, press the button (4)
fig.85 andslidethe handledownwards.
The height adjuster moves upwards even
without pressing the button.
Always adjust the height of the seat
belts to fit the person wearing it: this
precaution could greatly reduce the risk
of injury in the event of a crash.
Correct adjustment is obtained when
the belt passes approximately half way
between the shoulder and the neck.
85 06056V0002EM
77) 78)
WARNING
75) Never press button (3) when travelling.
76) Remember that in the event of an
accident, the rear seat passengers not
wearing seat belts are exposed to a very
serious risk and also represent a serious
danger for the front seat occupants.
77) Make height adjustment of the seat
belts when the car is stationary.
78) After height adjustment, always check
that the cursor to which the ring is fastened
is locked in one of the preset positions.
To do this, with the adjustment button
released, exert further pressure downwards
to allow the locking device to click if the grip
has not been released in one of the possible
positions.
SBA (Seat Belt Alert) SYSTEM
The SBR system warns the passengers
of the front and rear (where provided)
seats if their seat belt is not fastened.
The system warnings unfastened seat
belts with visual warnings (warning lights
on in the instrument panel and icons on
the display) and an acoustic warning (see
the following paragraphs).
FRONT SEAT BELT WARNING LIGHT
BEHAVIOUR
When the ignition device is turned to the
ON position, warning light (seefig.86)
comes onfor a few seconds,regardless
of the status of the front seat belts.
With vehicle at a standstill, if the driver
side seat belt or the passenger side
seat belt (with occupant seated) is
unfastened, the warning light stays on
constantly.
Loading ...
Loading ...
Loading ...