Loading ...
Loading ...
Loading ...
SAFETY
106
INSTALLING AN ISOFIX CHILD
RESTRAINT SYSTEM
91) 92) 93) 94) 95)
The rear side seats of the car are
equipped with ISOFIX attachments, for
fitting child restraint systems quickly,
simply and safely.
The ISOFIX system lets you install the
ISOFIX child restraining system without
using the car seat belts but connecting
them directly to the carseat with three
anchors in the car.
Traditional child restraint systems can
be fitted alongside ISOFIX child restraint
systems on different seats in the same
vehicle.
To install an ISOFIX child restraint
system, attach it to the two metal
anchors fig.95.Theycanbereachedby
lifting the flaps 2 located behind the rear
seat cushion, at the point where it meets
the backrest. Then fix the upper hook
(available with the child restraint system)
to the dedicated "top tether" anchor
fig. 96 locatedbehindthe seatbackrest.
95 06086V0009EM
96 06086V0005EM
fig.97 shows anexample ofaUniversal
ISOFIX child restraint system for weight
group 1.
WARNINGThe fig.97 isindicativeand
for assembly purposes only. Fit the
child restraint system according to the
instructions, which must be included.
97 06086V0006EM
NOTE When a Universal ISOFIX child
restraint system is used, only ECE R44
"ISOFIX Universal" (R44/03 or further
upgrades) type-approved child restraint
systems can beused(see fig.98).
The other weight groups are covered by
specific ISOFIX child restraint systems,
which can be used only if specifically
tested for this car (see list of cars
provided with the child restraint system).
98 06086S0007EM
Loading ...
Loading ...
Loading ...