Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR CAR
20
the lever until the desired position is
reached, then release it).
ELECTRICALLY ADJUSTABLE FRONT
SEATS
5)
NOTE The conformation of the seats
may vary according to the versions.
The buttons for electrical seat
adjustment are on the outer side of the
seat, near the floor.
These buttons can be used to adjust
the height, the lengthwise position in
relation to the vehicle and the angle of
the backrest.
16 04066V0003EM
Height adjustment
Use the rear part of the switch (1) fig. 16
to modify the height and/or the angle of
the seat cushion.
Longitudinal adjustment
Push switch (1) forwards or backwards
to move the seat in the corresponding
direction.
Backrest angle adjustment
Push switch (2) fig. 16 forwards or
backwards to adjust the backrest in the
corresponding direction.
Electric lumbar adjustment
Use the joystick (3) fig. 16 to operate the
lumbar area device to obtain maximum
driving comfort.
Press the following parts of the joystick:
top: inflates the cushion;
bottom: deflates the cushion;
front: inflates the upper part of the
cushion;
rear: inflates the lower part of the
cushion.
WARNING The electrical adjustment is
only allowed when the ignition device is
turned to ON and for about 2 minutes
after it is turned to STOP. The seat can
also be moved after opening/closing
the door for about 2 minutes; car
locking/unlocking or switching on of the
centre front ceiling light.
Seat angle adjustment (tilting)
(where provided)
The seat angle can be set to four
positions.
Lift or push the front part of the control
(1) to move the front part of the seat in
the corresponding direction. Release
control (1) when the seat has reached the
desired position.
Backrest width adjustment
(where provided)
Push the switches (4) fig. 16 to adjust the
width of the backrest by means of the
lateral padding.
Storing the driver’s seat positions
Buttons (5) fig. 17 allow you to store
and recall three different driver’s seat
positions.
You can store and recall for 20 minutes
with the starter switch in the STOP
position or with the starter switch in the
ON position, the engine running and the
vehicle moving. The performed position
memorisation is confirmed by a beep.
17 04066V0015EM
To memorise a seat position, adjust it
with the various controls, then press the
Loading ...
Loading ...
Loading ...