Loading ...
Loading ...
Loading ...
131
By turning the Rotary Pad, the speed
increases by 5 mph (5 km/h), on rotation,
from a minimum of 20 mph (30 km/h) to a
maximum of 110 mph (180 km/h).
DEACTIVATING THE DEVICE
Deactivating the device
To access the function, on the main menu
select the following items in sequence:
"Settings", "Safety", “Speed Limiter” and
“Off”.
Automatic off of the device
The device deactivates automatically in
the event of fault in the system. In this
case, contact an Alfa Romeo Dealership.
CRUISE CONTROL
This is an electronically controlled
driving assistance device that allows the
desired car speed to be maintained,
without having to press the accelerator
pedal. This device can be used AI
speed above 20 mph (30 km/h) on long
stretches of dry, straight roads with few
variations (e.g. motorways).
It is therefore not recommended to use
this device on extra-urban roads with
traffic. Do not use the device in town.
Travelling downhill, the system could
brake the car to keep the set speed
unvaried.
ACTIVATING THE DEVICE
120) 121) 122)
To activate the device press button
fig. 114.
The white symbol on the instrument
panel display switches on to signal that
the device is on.
The Cruise Control function can remain
active concurrently with the Speed
Limiter system. If a speed limit below
the one indicated in the Cruise Control is
selected, the Cruise Control speed will be
lowered to that of the Speed Limiter.
The device cannot be engaged in 1
st
or
reverse gear: it is advisable to engage it
in 3
rd
gear or higher.
WARNING It is dangerous to leave the
device on when it is not used. There
is a risk of inadvertently activating it
and losing control of the car due to
unexpected excessive speed.
SETTING THE DESIRED SPEED
Proceed as follows:
activate the device;
when the car has reached the desired
speed,raise/lower theSETleverfig.114
and release it to activate the device.
When the accelerator is released, the
car will maintain the selected speed
automatically.
If needed (when overtaking for instance),
you can accelerate simply by pressing
the accelerator; when you release the
pedal, the vehicle goes back to the speed
stored previously.
When travelling downhill with the device
active, the car speed may slightly exceed
the stored one.
WARNING Before raising/lowering the
SET lever, the car must be travelling at a
constant speed on a flat surface.
INCREASING / DECREASING SPEED
112 07146V0030EM
Accelerating when overtaking
Depress the accelerator pedal: when this
is released the car will gradually go back
to the stored speed.
WARNING The device keeps the speed
stored even uphill and downhill. A slight
variation in the speed on slight rises is
completely normal.
Loading ...
Loading ...
Loading ...