Loading ...
Loading ...
Loading ...
23
lever folds down the section of the
backrest on the same side.
22 04066V0007EM
Repositioning the backrests
12)
Move the seatbelts to the side, making
sure that they are correctly extended
and not twisted and that they are not
trapped behind the backrests of the
seats, then lift the backrests pushing
them back until you hear the locking click
on both attachment mechanisms.
WARNING
9) All adjustments must be made with the
car stationary.
10) After releasing the adjustment lever,
always check that the seat is locked on the
guides by trying to move it back and forth.
If the seat is not locked into place, it may
unexpectedly slide and cause the driver to
lose control of the car.
11) Always make sure that all those on board
the car are seated and are wearing their
seat belts correctly.
12) Make sure the backrests are properly
secured at both sides to prevent them
from moving forward, in the event of sharp
braking, with possible impact with of the
passengers.
IMPORTANT
4) The fabric upholstery of the seats has
been designed to withstand long-term wear
deriving from normal use of the car. Some
precautions are however required. Avoid
prolonged and/or excessive rubbing against
clothing accessories such as metal buckles
and Velcro strips which, by applying a high
pressure on the fabric in a small area, could
cause it to break, thereby damaging the
upholstery.
5) Do not place any kind of items under
the electrically adjusted seats as they
could impede their movement or otherwise
damage the controls.
6) Before tilting the backrest, remove any
objects on the seat cushion.
HEAD RESTRAINTS
ADJUSTMENTS
13)
Upward adjustment: raise the head
restraint until it clicks into place.
Downward adjustment: press button (1)
fig. 23 and lower the head restraint.
23 04076V0001EM
HEAD RESTRAINTS (removal)
Proceed as follows to remove the head
restraints:
raise the head restraints to their
maximum height;
press the button (1), lift the head
restraint, then, pressing the device (2)
fig. 23 (front head restraints) or (1) and (2)
fig. 24 (rear head restraints), remove it.
Loading ...
Loading ...
Loading ...