Loading ...
Loading ...
Loading ...
VDL (E3.1) 10/2020 Page 74/196
8. Functional overview and menu structure of the controller
The available controller functions depend on the current authorization (chap.12). Unless noted otherwise,
the figure in this manual show the functional range, which is available for the user with “Admin” authorization
level
The MB2 chamber controller controls following parameters inside the chamber:
• Temperature in °C or °F
• Pressure in mbar
You can enter the desired set point values in fixed value operation mode directly on the display surface or
via the setpoint menu. For program operation the controller offers programming week and time programs.
In addition, there is a timer program available (stopwatch function).
The controller offers various notifications and alarm messages with visual and audible indication and remote
alarms via e-mail, an event list (trace file) and the graphical display of the measuring values in the chart
recorder view. The MB2 program controller permits programming temperature and pressure cycles, and
specifying special controller functions for each program section. You can enter values or programs directly
at the controller or use the APT-COM™ 4 Multi Management Software (option) specially developed by
BINDER.
Operating mode
Temperature values
Pressure values
Actual values
Set-point values
Functional icons
Figure 20: Normal display of the MB2 program controller (sample values)
Loading ...
Loading ...
Loading ...