Loading ...
Loading ...
Loading ...
VDL (E3.1) 10/2020 Page 163/196
• For the correct function and temperature display of the device, this plug connection must not be discon-
nected.
NOTICE
Danger of malfunctions by disconnecting the plug connection of the object tempera-
ture display.
Incorrect regulation and display of the temperature.
∅ Do NOT disconnect the plug connection of the object temperature display.
24.3.2 Display on the MB2 controller
Normal display with object temperature display
(sample values)
The object temperature data are put out together with the data of the temperature controller to the cham-
ber’s interface and can be documented by the APT-COM™ 4 Multi Management Software (option, chap.
24.1) developed by BINDER.
25. Cleaning and decontamination
Clean the chamber after each use to avoid potential corrosion damage by ingredients of the charging ma-
terial. .
25.1 Safety instructions on cleaning and decontamination
During cleaning and decontamination, no explosive atmosphere may be present in the installation area of
the chamber and inside the chamber.
DANGER
Fire and explosion hazard due to explosive atmosphere during cleaning and decon-
tamination.
Serious injury or death from burns and / or explosion pressure.
Before performing any cleaning and decontamination measures, make sure that there
is no explosive atmosphere in the installation area of the chamber or inside the cham-
ber.
∅ Do NOT clean the chamber in potentially explosive areas.
Before commissioning, ensure that the system is correctly and completely grounded
Loading ...
Loading ...
Loading ...