Hikvision DS-TP50-08H User Manual

Loading ...

Chapter 10 Alarm Congifuraon

10.1 Set Alarm Input

Alarm signal from the external device triggers the corresponding acons of the current device.

Before You Start

Make sure the external alarm device is connected. See Quick Start Guide for cable connecon.

Steps

Go to Param Cong → Event → Basic Event → Alarm Input .

Select Alarm Input No. and edit Alarm Name.

Note

If you select Alarm Input No. as A<-1(Cabinet Door Alarm) or A<-2(Cabinet Door Alarm)

(opons vary with dierent models), please go to Param Cong → Advanced Sengs → Other

Sengs to set Cabinet Door Name and Cabinet Door No..

Select Alarm Type according to the alarm device type.

Check Enable Alarm Input Handling.

Refer to

Set Record Schedule for seng Arming Schedule.

Refer to Set Linkage Mode for seng Linkage Acon.

Oponal: Click Copy to... to copy the sengs to other alarm input channels.

Click Save.

10.2 Set Alarm Output

Set alarm output to realize linkage alarm via external alarm device when the event occurs.

Before You Start

Make sure the external alarm device is connected. See Quick Start Guide for cable connecon.

Steps

Go to Param

Cong → Event → Basic Event → Alarm Output .

Terminal Server User Manual

Loading ...

Hikvision DS-TP50-08H Terminal Serve