Loading ...
Loading ...
Loading ...
Figure 3-2 Set Internal IP
2.
Select NIC Type according to the actual network.
3.
Set relevant network parameters.
-
Check Auto to get the IPv4 and IPv6 addresses automacally if the network supports
distribung the IP addresses automacally.
-
Manually enter the IPv4 and IPv6 parameters and the MTU according to the actual network
condions.
Note
●
The internal IP address and the camera should be set to the same network segment, and it
must be set to a dierent network segment from that of the external IP address.
●
MTU stands for the maximum transmission unit in the network.
4.
Click Save.
3.1.2 Set External IP
The external network is set for the IP of the G2 network interface on the device panel, and it
mainly communicates with the external network
(plaorm, remote host, etc.).
Steps
1.
Go to Param Cong → Network → Basic Sengs → TCP/IP → External Network Sengs .
Terminal Server User Manual
6
Loading ...
Loading ...
Loading ...