Loading ...
Loading ...
Loading ...
Figure 3-3 Set External IP
2.
Select NIC Type according to the actual network.
3.
Set relevant network parameters.
-
Check Auto to get the IPv4 and IPv6 addresses automacally if the network supports
distribung the IP addresses automacally.
-
Manually enter the IPv4 and IPv6 parameters and the MTU according to the actual network
condions.
Note
●
The network segment of external IP address should be dierent from that of the internal IP
address.
●
MTU stands for the maximum transmission unit in the network.
●
Set DNS Server if remote domain name access is needed.
4.
Click Save.
3.2 Set
Stac Router
Set a stac router for access across network segments. The device will transmit data as a router.
Steps
1.
Go to Param Cong → Network → Basic Sengs → Stac Router .
2.
Click Add to add a stac router.
Terminal Server User Manual
7
Loading ...
Loading ...
Loading ...