Loading ...
Loading ...
Loading ...
Connecng the device via 3G/4G.
5.
Set MTU.
Note
The MTU is the maximum payload length for a parcular transmission media.
6.
Select Dial-up Mode according to the actual needs.
7.
Click Save.
8.
Oponal: You can go to Param Cong → System Status → Server Status → Wireless Network
Status to view results.
7.2 Connect to ISUP Plaorm
ISUP (EHome) is a plaorm access protocol. The device can be remotely accessed via this plaorm.
Before You Start
●
Create the device ID on ISUP
plaorm.
●
Ensure the device can communicate with the plaorm normally.
Steps
1.
Go to Param Cong → Network → Advanced Sengs → ISUP .
Figure 7-2 Connect to ISUP Plaorm
2.
Select ISUP plaorm ID.
3.
Check Enable.
4.
Select Version.
5.
Enter Server Address, Port, and Device ID.
Note
The device ID should be the same with the added one on the ISUP plaorm.
Terminal Server User Manual
25
Loading ...
Loading ...
Loading ...