Hikvision DS-TP50-08H User Manual

Loading ...

Check the camera that need to be added, enter the corresponding user name and password,

and click OK.

Note

You can check cameras that have the same user name and password to add in batch.

Oponal: You can also do the following operaons.

Edit Edit the added camera IP address.

Delete Delete the added camera.

Reboot Reboot the online camera.

Access Directly Access the online camera.

Manual Add

Add manually if you need to customize the access protocol or port.

Before You Start

Connect the device to the camera via the network interface.

Steps

Go to Param Cong → System → Camera Management → IP Camera .

Click Add.

Figure 3-5 Manual Add

Select Registraon Mode.

Select Protocol Type of the added camera.

Note

The device and the camera should both support the selected protocol type.

Enter the camera IP address/domain name, port, user name, password, and other informaon.

Terminal Server User Manual

Loading ...

Hikvision DS-TP50-08H Terminal Serve