Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/57268812-ds-tp50-08h/bg12.png)
Note
Channel No. is only used to select the access channel when mulple channel devices are
accessed. For example, if you want to access the Channel 5 device, you can choose Channel 2 as
a network camera to access, then enter 2 at Channel No..
6.
Click OK.
7.
Oponal: You can also do the following operaons.
Edit Edit the added camera IP address.
Delete Delete the added camera.
Reboot Reboot the online camera.
Access Directly Access the online camera.
3.3.2 Set Interacon Parameters
Set interacon parameters to control the interacon data between the camera and the device.
Before You Start
Add the camera.
Steps
1.
Go to Param Cong → System → Camera Management → Interacve Sengs .
2.
Select a camera.
3.
Select an
interacon mode.
-
Normal Mode: In this mode, you can know the camera status via the camera's stream, and
you can record and preview images and receive image data via the server.
-
Data Receiving Mode: In this mode, you can only receive image data via the server, but you
cannot record or preview the images.
4.
Click Save.
3.4 Set Remote Host
Set remote host when the device needs to transmit data to the central control plaorm.
Before You Start
Set the remote host, and ensure the device can communicate normally with the remote host.
Steps
1.
Go to Param
Cong → Plaorm Sengs → Remote Host .
2.
Select a remote host.
Terminal Server User Manual
10
Loading ...
Loading ...
Loading ...