Hikvision DS-TP50-08H User Manual

Loading ...

Chapter 2 Acvaon and Login

2.1 Acvaon

For the rst-me access, you need to acvate the device by seng an admin password. No

operaon is allowed before acvaon. The device supports mulple acvaon methods, such as

acvaon via SADP soware, web browser, and iVMS-4200 Client.

Note

Refer to the user manual of iVMS-4200 Client for the acvaon via client soware.

2.1.1 Default Informaon

The device default informaon is shown as below.

●

Default IP address: The default IP address for G1 network interface is 192.1.0.64. The default IP

address for G2 network interface is 192.168.1.64.

●

Default user name: admin.

2.1.2

Acvate via SADP

SADP is a tool to detect, acvate, and modify the IP address of the device over the LAN.

Before You Start

●

Get the SADP soware from the supplied disk or the ocial website ( hp://

www.hikvision.com/ ), and install it according to the prompts.

●

The device and the computer that runs the SADP tool should belong to the same network

segment.

The following steps show how to

acvate one device and modify its IP address. For batch acvaon

and IP address modicaon, refer to User Manual of SADP for details.

Steps

Run the SADP soware and search the online devices.

Find and select your device in online device list.

Enter a new password (admin password) and

conrm the password.

Cauon

STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of

your own choosing (using a minimum of 8 characters, including upper case leers, lower case

leers, numbers, and special characters) in order to increase the security of your product. And

Terminal Server User Manual

Loading ...

Hikvision DS-TP50-08H Terminal Serve