Loading ...
Loading ...
Loading ...
Figure 6-40 UPnP
Step 2 Click next to Enable , and there are two mapping modes: Custom and Default.
●
Select Custom, click
and then you can change external port as needed.
●
Select Default, and then the system nishes mapping with unoccupied port
automatically, and you cannot edit mapping relation.
Step 3 Click Apply.
Open web browser on PC, enter http:// wide area IP address: external port number, and
then you can visit the local area device with corresponding port.
6.3.7 SNMP
SNMP (Simple Network Management Protocol), which can be used to enable software such as MIB
Builder and MG-SOFT MIB Browser to connect to the camera and manage and monitor the camera.
Prerequisites
●
Install SNMP monitoring and managing tools such as MIB Builder and MG-SOFT MIB Browser.
●
Get the MIB le of the matched version from technical support.
Procedure
Step 1 Select > Network > SNMP.
Operation Manual
52
Loading ...
Loading ...
Loading ...