Loading ...
Loading ...
Loading ...
17-54 APPENDIX
Cable, Wire, and Hose Routing
CAL, SEA-B1 and TH Models
1. Run the purge hose to the inside of the brake hoses (ABS equipped models).
2. Run the purge hose above the radiator overflow hose.
3. Run the purge hose above the radiator overflow hose. Run it to the outside of the main harness.
4. Run the breather hose above the battery negative (–) cable, purge hose, starter motor cable
and main harness.
5. Run the purge hose to the inside of the fuel tank drain hose.
6. Clamp (Hold the purge hose. Install it to the frame.)
7. Run the purge hose under the rear wheel rotation sensor lead, crankshaft sensor lead and rear
brake light switch lead.
8. Run the purge hose above the brake hoses (ABS equipped models) and main harness.
9. Run the purge hose under the brake hoses (ABS equipped models). Run it to the inside of the
ABS hydraulic unit lead (ABS equipped models).
Loading ...
Loading ...
Loading ...