Loading ...
Loading ...
Loading ...
ELECTRICAL SYSTEM 16-113
Fuse
30 A Main/15 A ECU Fuse Removal
•
Remove:
Starter Relay Cover (see Starter Relay Inspection)
•
Pull out the fuses [A] from the starter relay with needle
nose pliers.
Fuse Box Fuse Removal
•
Remove:
Front Seat (see Front Seat Removal in the Frame chap-
ter)
•
Unlock the hook [A] to lift up the lid.
Fuse Box 1 [B]
Fuse Box 2 [C]
•
Pull the fuses [A] straight out of the fuse box with needle
nose pliers.
Fuse Installation
If a fuse fails during operation, inspect the electrical sys-
tem to determine the cause, and then replace it with a
new fuse of proper amperage.
•
Install the fuse box fuses on the original position as spec-
ified on the lid.
Fuse Inspection
•
Removethefuse(see30AMain/15AECU/FuseBox
Fuse Removal).
•
Inspect the fuse element.
If it is blown out, replace the fuse. Before replacing a
blown fuse, always check the amperage in the affected
circuit. If the amperage is equal to or greater than the
fuse rating, check the wiring and related components for
a short circuit.
Housing [A]
Fuse Element [B]
Terminals [C]
Blown Element [D]
NOTICE
When replacing a fuse, be sure the new fuse
matches the specified fuse rating for that circuit.
Installation of a fuse with a higher rating may cause
damage to wiring and components.
Loading ...
Loading ...
Loading ...