Loading ...
Loading ...
Loading ...
ELECTRICAL SYSTEM 16-75
Meter, Gauge, Indicator Unit
•
Check the following items.
The number 39 [A] in the display appears and yellow en-
gine warning indicator (LED) [B] goes on.
•
Push the upper button for more than 2 seconds.
•
Check the following items.
The display returns ODO mode from number 39.
The yellow engine warning indicator (LED) goes on.
If the meter unit does not work, replace the meter unit.
NOTE
○
The number 39 is service code of Self-Diagnosis (see
Fuel System (DFI) chapter). It is the service code of the
meter communication line error.
○
The number 39 in the display and yellow engine warning
indicator (LED) disappear when the meter unit is con-
nected to main harness of the normal motorcycle.
Check 3-3: Immobilizer Blinking Mode Inspection
•
Connect the leads in the same circuit as Check 3-1.
•
Disconnect the terminal [6].
•
Check that the red warning indicator (LED) [A] starts blink-
ing (Immobilizer Warning Indicator Blinking Mode).
•
Push the upper [B] and lower [C] buttons more than 2
seconds, within 20 seconds after the terminal [6] discon-
nected.
•
Check that the red warning indicator (LED) goes on 1 sec-
ond, and then the indicator goes off (Immobilizer No Blink-
ing Mode).
NOTE
○
For this inspection, be sure the battery is 12.2 V or
more. Immobilizer Blinking Mode does not work, when
the battery voltage is less than 12 ±0.2 V.
•
Connect the terminal [6] to the battery (+) terminal.
•
And then, disconnect the terminal [6].
Loading ...
Loading ...
Loading ...