Loading ...
Loading ...
Loading ...
APPENDIX 17-37
Cable, Wire, and Hose Routing
1. Water Hoses
2. Install the clamps as shown.
3. Install the water hose so that the white paint mark faces upward.
4. Install the water hose so that the white paint mark faces outward.
5. Align the white paint mark of the water hose with the projection on the water pipe.
6. Install the water hose until the rised portion of the water pipe.
7. Curve Side
8. Air Bleeder Hose
9. Install the air bleeder hose above the thermostat cover bolt.
10. Viewed from A
11. Viewed from B
12. Install the clamp so that the tab of the clamp faces rearward.
13. Breather Hose
14. Install the clamp so that the tab of the clamp faces rightward.
15. Install the breather hose so that the white paint mark faces rearward.
Loading ...
Loading ...
Loading ...