Loading ...
Loading ...
Loading ...
FUEL SYSTEM (DFI) 3-131
Throttle Body Assy
Throttle Body Assy Installation
•
Be sure to position the throttle body assy holder clamp in
original position (see Throttle Body Assy Holder Installa-
tion in the Engine Top End chapter).
•
Connect the fuel injector connectors [A].
•
Install the throttle body assy to the throttle body assy hold-
ers.
•
Tighten:
Torque - Throttle Body Assy Holder Clamp Bolts: 2.9 N·m
(0.30 kgf·m, 26 in·lb)
Special Tool - Carburetor Drain Plug Wrench, Hex 3:
57001-1269
•
Apply a thin coat of grease to the throttle cable lower ends.
•
Fit the accelerator cable end [A] and the decelerator cable
end [B] into the throttle pulley.
The accelerator cable has a clamp [C].
•
Install the clamp securely.
•
Turn the throttle grip and make sure that the throttle pulley
moves smoothly and return by spring force.
•
Run the leads and hoses correctly (see Cable, Wire, and
Hose Routing section in the Appendix chapter).
•
Install the removed parts (see appropriate chapters).
•
Adjust:
Throttle Grip Free Play (see Throttle Control System In-
spection in the Periodic Maintenance chapter)
Idle Speed (see Idle Speed Adjustment in the Periodic
Maintenance chapter)
Loading ...
Loading ...
Loading ...