Loading ...
Loading ...
Loading ...
APPENDIX 17-21
Cable, Wire, and Hose Routing
1. Clamp (Hold the alternator lead, side stand switch lead, engine subharness and fuel tank drain
hose. Face the open side of the clamp to the inside.)
2. Clamp (Hold the alternator lead and side stand switch lead. Install it to the frame as shown.)
3. Run the side stand switch lead under the fuel injector lead.
4. Alternator Lead
5. Starter Motor Cable
6. Main Harness
7. Install the clamp to the rear frame bracket as shown.
8. Run the fuel tank breather hose (other than CAL, SEA-B1 and TH models), fuel tank drain hose
and side stand switch lead to the inside of the engine sprocket cover.
9. Run the side stand switch lead to the outside of the lower fairing.
10. Side Stand Switch Lead Connector
11. Fuel Hose
12. ABS Hydraulic Unit (ABS Equipped Models)
13. Run the starter motor cable to inside of the brake hoses (ABS equipped models), fuel tank
breather hose (other than CAL, SEA-B1 and TH models), fuel tank drain hose, side stand switch
lead, alternator lead, engine subharness and air cleaner drain hose.
14. Engine Ground Terminal
15. Fuel Tank Breather Hose (Other than CAL, SEA-B1 and TH Models)
16. Fuel Tank Drain Hose
17. Air Cleaner Drain Hose
18. Run the engine subharness to the inside of the air cleaner drain hose.
19. Engine Subharness
Loading ...
Loading ...
Loading ...