Loading ...
Loading ...
Loading ...
16-28 ELECTRICAL SYSTEM
Battery
Battery Removal
•
Turn the ignition switch off.
•
Remove:
Front Seat (see Front Seat Removal in the Frame chap-
ter)
•
Disconnect the negative (–) cable [A].
NOTICE
Be sure to disconnect the negative (–) cable first.
•
Slide out the positive (+) terminal cap [B] and disconnect
the positive (+) cable [C].
•
Remove the battery.
Battery Installation
•
Turn the ignition switch off.
•
Put the battery into the battery case.
•
Install the positive (+) cable [A] first.
•
Install the negative (–) cable [B].
•
Apply a light coat of grease on the terminals to prevent
corrosion.
•
Cover the positive (+) terminal with the cap [C].
•
Install the front seat (see Front Seat Installation in the
Frame chapter).
Battery Activation
Electrolyte Filling
•
Make sure that the model name [A] of the electrolyte con-
tainer matches the model name [B] of the battery. These
names must be the same.
Battery Model Name
ZR1000F/G: YT12A-BS
NOTICE
Each battery comes with its own specific elec-
trolyte container; using the wrong container may
overfill the battery with incorrect electrolyte, which
can shorten battery life and deteriorate battery per-
formance. Be sure to use the electrolyte container
with the same model name as the battery since the
electrolyte volume and specific gravity vary with
the battery type.
Loading ...
Loading ...
Loading ...