Loading ...
Loading ...
Loading ...
17-16 APPENDIX
Cable, Wire, and Hose Routing
1. Fuel Pump Lead
2. Main Harness
3. Install the clamp to the battery case as shown.
4. Clamp (Hold the main harness. Install it to the rear frame bracket as shown.)
5. Front
6. Install the fuel pump lead connector to the bracket.
7. Install the clamps to the frame as shown.
8. ECU Lead
9. Starter Relay
10. Run the main harness and starter motor cable between the rear frame bracket and battery case.
11. Clamp (Hold the fuel pump lead.)
12. Vehicle-down Sensor
13. Run the fuel pump lead above the main harness.
14. Immobilizer Amplifier (Equipped Models)
Loading ...
Loading ...
Loading ...